How To Repair Door Knob Hole In Wall
That ugly hole in the wall from a door knob can be a pretty unproblematic set.
Find yourself a piece of bit 1/2 inch drywall nigh 3 times the size of the pigsty.
Score the behind of the drywall allowing about 1" to i.5" on the edges.
Snap the edges off of the repair piece and get out the newspaper on the front. Make sure to clean off any remaining drywall from the paper.
Line up the repair piece to cover the hole and whatsoever damage portion of the wall.
Trace effectually the edge of the repair piece to mark the cut line.
Cutting along the line with a box knife or drywall pigsty saw.
Dry fit the repair piece to make sure information technology fits flush. Exist sure to mark the direction that the slice fits.
With a 6" drywall pocketknife, spread drywall mud around the edge of the hole and on the inside border of the repair expanse. It's a good idea to add a picayune mud to the edge of the repair piece besides.
Insert the repair slice into the hole you prepared in the wall. Use a 12" drywall knife to push button the piece in affluent working the excess mud out from under the edges of the paper.
Before adding your second coat of drywall mud. Make sure that the start ane has dried. Resist the urge to finish this with one glaze. The mud shrinks as it dries then programme on 3 thin coats to finish.
After your last glaze has dried, use a damp towel to sand the surface and blend the edges. You are now set up for primer and paint.
Source: https://guides.brit.co/guides/fix-a-door-knob-hole-in-drywall
Posted by: metzgersprevelink.blogspot.com
0 Response to "How To Repair Door Knob Hole In Wall"
Post a Comment